Breaking News: Tips and Tricks to Reduce Power Consumption of 13900KS Processors
Date: March 15, 2023
Category: Technology, Gaming, Sustainability
In a shocking revelation, the 13900KS processor, a behemoth of a chip, has been found to consume an astonishing amount of power. With the increasing concerns about energy efficiency and sustainability, our team has been working tirelessly to bring you the latest updates on how to reduce the power consumption of this powerful processor.
Power Consumption: The Concern
The 13900KS processor, with its impressive clock speed of 5.6 GHz and 24 cores, is undoubtedly a powerhouse. However, its power consumption has been a major concern for many gamers and content creators. According to recent reports, the processor can consume up to 350 watts of power, which is significantly higher than its predecessors.
Tips to Reduce Power Consumption
Fortunately, our team has discovered some tips and tricks to help reduce the power consumption of the 13900KS processor:
- Underclocking: One of the simplest ways to reduce power consumption is to underclock the processor. This can be done by adjusting the clock speed in the BIOS settings. By reducing the clock speed, you can significantly reduce the power consumption.
- Thermal Management: Proper thermal management is crucial to reduce power consumption. Make sure to keep your processor at a reasonable temperature by using a good cooling system and ensuring good airflow.
- Power Management Settings: Adjusting the power management settings can also help reduce power consumption. Disable unnecessary features like Hyper-Threading and Turbo Boost to reduce power consumption.
- Monitor Your Power Consumption: Keep an eye on your power consumption by using software like HWiNFO or GPU-Z. This will help you identify areas where you can optimize your system for better power efficiency.
- Upgrade to a More Efficient Power Supply: If your power supply is old or inefficient, it may not be able to handle the power requirements of the 13900KS processor. Consider upgrading to a more efficient power supply to reduce power consumption.
Conclusion
The 13900KS processor is an incredible piece of technology, but its power consumption is a major concern. By implementing these tips and tricks, you can significantly reduce the power consumption of your processor and enjoy a more sustainable gaming and content creation experience.
SEO Tags:
- 13900KS power consumption
- How to reduce power consumption of 13900KS
- Tips for reducing power consumption of 13900KS
- Power consumption of 13900KS processor
- 13900KS processor power management
- How to save power with 13900KS
- 13900KS power efficiency
- Reduce power consumption of 13900KS processor
- 13900KS processor power usage
- Power consumption tips for 13900KS
Okay before I start I know this is overclocking and I am trying to keep things stock BUT you guys are the most knowledgeable group and you give the best advice.
13900ks / lian li galahad ii trinity performance / z790 asrock taichi carrara / asus tuf 4090 / 32 gb corsair ram at 7200 mts /1000w PSU / Phanteks Enthoo 719 case
Everything had been running fine but I finally caught up with all of the intel chip news and wanted to look into it. Temps were normal across what I normally play but yesterday I got space marine 2 and it caused my CPU to hit 100c at 323w which seemed like a lot.
Ran cinebench r23 and got around 37000. I figured I could use an upgrade in performance from my last AIO so I picked up this new Lian Li and its great generally speaking. I updated my bios to the latest which adds the "intel baseline" stuff, enabled it and ran cinebench again with this result being 26000 which hit 54c max with it briefly sitting at 250w~ then dropping to 120w~ with my cores around 4100mhz for the duration.
I am obviously missing something here in terms of settings but I am a little lost. There has to be a middle ground between either 6ghz 100c at 323w and 4.1ghz 54c at 123w right? Is this something to do with pl1 and pl2 being different now?
I know the CPU I have isnt something most people would buy to just leave stock and play games on but I could afford it last year and it was the "best" in my local store. Please dont bully me đ
View info-news.info by Roughly3Owls
The photo is from a third run at cinebench with the intel baseline enabled but the power delivery setting set to bios default.
Your original ~37k R23 run sounds like you’re running at stock clocks. My 13900KS at stock clocks (5.6P, 4.3E) would score 38-39k at roughly 320w.
The reason your score went down is the power limits, PL1 and PL2. These chips suck juice and even 253w will hold one back in all-core workloads.
Otherwise, the new baseline profile and bios likely tuned the v-core your chip is receiving, resulting in it being a little less efficient, aka, using more voltage for the same clocks.
You could spend a lot of time tuning the system if you want to go down the rabbit hole. I would pick power limits your cooling can handle, and tune AC_LL and DC_LL to start.